Hi all ;
We benefit from material ladger in Co module. Also ,we can get consumption details in CKM3N / Sap Ecc.
Our problem is that ' I can not get data from data source ' Cost Object Controlling: Period End' = '0CO_PC_02'. Data extraction sap to psa ended with successfully but data record 0.
On the otherhand , i have get data from '0CO_PC_01' = 'Cost Object Controlling: Plan/Actual Data'. How can i find the root of problem ?
Regards.
M.Ozgur Unal
Dear All,
We need to fetch the data from ECC table COSP where Value Type = 11(Statistical Postings) into BW but couldnt find any DS.
We also checked the DSs 0CO_OM_WBS_1 and 0CO_OM_WBS_6 but didnt find the required Value Type.
We have a field as VTSTAT(Statistic ID) in DS 0CO_OM_WBS_1 with values as 0 and 1 against Vtype 10(Actuals) and 20(Plan). But by this way also unable to reconcile data back with COSP table.
Could you please let us know if anyone has come across such requirement?
Thanks,
Nilesh
Hi all
I've created a Hybrid provider with 2 info cubes over a standard CO_PA data source
In order to enable that I've change field VIRTUALCUBE to '2' in table ROOSOURCE, so that my data source will support direct access.
Now I was able to build a Hybrid provider with a virtual cube and a standard one.
After that I've initialized the datasource and changed some records in the source system.
I can see the changed records in rsa3 in delta mode.
When I try to view data in BW side I see all records in the virtual cube and not only the delta!
Any suggestions???
Shlomi
Hello,
I am unable to load Delta for COPA extractor due to below message. I have done INIT W/O data transfer but still have same issue.
I have also created new delta records but the request is not visible in KEB2. Is any one familiar with KEB5 and how I can fix the time stamp and get my delta load to work.
Are there other ways of resolving it.
Thanks,
Bhat
Hi everyone,
While I try to execute DTP to transfer data from InfoCube to InfoCube (0PA_C01 -> 0TMC_C02), I got below error. I have looked on SAP Note 1776820 which it's quite similar but I'm on SAP BW 7.31 SP 10 and BI_Cont 7.47 SP 8. I have loaded data into 0PA_C01 successfully but this problem appear when I loaded data into 0TMC_C02. Any ideas how to get rid of this?
Note: I haven't changed source code in End Routine; everything was standard code and no error found when I checked the code.
Please advice!!
Regards,
Daro
Hello Experts,
We're having some issues with Open Hub connections.
Sometimes the 3rd party does not receive any data and when we check the Process Chain we get the following error:
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system MSSAPBI.
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Programa de transação não registrad).
Error while updating to target ZEMPME (type Open Hub Destination)
Operation could not be carried out for
Exception CX_RS_FAILED logged
Exception CX_RS_FAILED logged
Can you understand what can be happening?
Best Regards,
Rui Romba
Hi everyone!
I'm using for my MM project ODS 0PUR_O01 and the infosource 2LIS_02_SCL.
When I looked on "SAP Library" it does not say that 0PUR_O01 is getting data from 2LIS_02_SCL -
but on the other hand I saw in forums that BW people said they do use 0PUR_O01 to get data from 2LIS_02_SCL.
I would like your opinion on this dilemma.
And to which Cube this ODS goe's to??
thank you all.
Hi Experts,
We have a requirement to bring PO# in AR Aging Report(s). We have used "reference" field from FBL5N as of now but it's a free field, and it brings invoice number, Customer PO number etc.
Requirement is to bring PO numbers only in AR Aging reports. so Is there any other field which we can use in AR Reports to fulfill this requirement? and How?
Please suggest!!!!
Thanks,
Bhavin Vyas
Hi gurus,
We are loading DSO from a Cube. That cube is compressed with requests older than 5 days. When running a normal DTP in “full” mode with filter for the last 6 months, it does not take un-compressed data, it only extracts and transfer compressed data (from E table).
Any idea what is the cause of this?
We have BW 7.31 system.
Regards, Reynir
Hello,
Yesterday morning, I did realignment of COPA data with TCODE KEND, the realignment was successful. Every night we have a process chain that load delta loads and this chain failed with the message that "Delta no longer possible due to realignment".
I am thinking of doing INIT without data transfer and not sure if I need to reset the delta in KEB5.
Does any have any idea how I can resolve it and what steps I should take in resolving it.
From the logs in KEB5, The replication status says "successful"
Thanks,
Bhat
Hi all!!!
Im trying to use the extractors 0CML_INIT_BUDAT, 0CML_INIT_DFAELL and 0CML_INIT_DDISPO to obtain information about CML in BW.
How can I revised if there have a prerequesit to use, sometime like that version of R/3 or BW to can use this extractor; i need to be sure that this extractor work correctly and the delta is correctly in the system.
Im looking for documentation but I dont find.
Thanks in advanced
Monica Elizondo
Dear Expert,
Here we're using 0CRM_SALES_ACT_1 to get document head data for Complaints, and using 0CRM_COMPLAINTS_I to get the Complaints item data.
But we found that extractor 0CRM_SALES_ACT_1 didn't get all the Complaints as which we can get in 0CRM_COMPLAINTS_I.
For example, we define our business transaction type "ZCOM" as for Complaints, so we extract data from 0CRM_SALES_ACT_1 with a full loading with selection PROCESS_TYPE = 'ZCOM' . And then, we can get some Complaints in PSA but not all of them, we see some Complaints are missing in the PSA, and then we go back to run RSA3 in source system it's the same result.
Please guide how can we use 0CRM_SALES_ACT_1 to get all the Complaints?
Thank you,
Andy
Hello,
I have one question can I use the 2LIS_13_VDHDR extractor for extracting the data in a non SAP BW System?
At the moment I get the error "no active BW System". The extract structur is active. I had control this...
Hi,
I need some information about extracting to BW loyalty card numbers and mapping between partners and cards.
I can not find card number in extractors like 0BPARTNER_ATTR, 0CRM_LOY_MA, 0CRM_LOY_MSH and so on.
Is there any extractor of cards master data (card number, status, date of validity and so on)?
Is there any extractor with mapping partners<->cards or memberships<->cards?
If no then which extractor is the best to be enhanced with these fields?
Thanks.
Hello
I have a problem with writing to the trfc-queue.
I have a datasource with Deltatype AIM and I trie to fill
the Queue with al little report which calls the FM RSC1_TRFC_QUEUE_WRITE.
The report works whitout any errors and the sy-subrc is 0 but I cant find anything in the Delta-Queue when I look into the Tr. RSA7.
Can anyone help me please?
Here is the report:
REPORT zv_v4_test_qrfc.
DATA l_v_isource LIKE rssis-isource.
DATA l_t_zcf591 LIKE zcf591 OCCURS 0.
DATA l_v_flush TYPE c.
DATA l_t_arfc LIKE arfccallid OCCURS 0.
l_v_isource = 'ZV_V4_C01_DS_TEMPLATE'.
SELECT * FROM zcf591 INTO TABLE l_t_zcf591.
CALL FUNCTION 'RSC1_TRFC_QUEUE_WRITE'
EXPORTING
i_isource = l_v_isource
i_no_flush = l_v_flush
TABLES
i_t_data = l_t_zcf591
EXCEPTIONS
OTHERS = 1.
WRITE: 'SY-SUBRC=', sy-subrc.
MFG
Michael Ruschmann
Hello Experts,
We are using the Datasource - 0CRM_TSS_DTRACK to extract Document data from CRM. There is a requirement to enhance the DS by adding custom field 'Status Reason Code'. Please let us know which BAdi - RSU5_SAPI_BADI / CRM_BWA_MFLOW is the better option and why. Also we are not able to see the DS in BWA5. We are in CRM version 7.
Thanks In Advance !
Regards,
Aparna
Hi people,
we are using the new FI-GL extractors (3FI_GL_xx_TT) in delta process "ADDD like 'ADD' but via Delta Queue".
When we run the extractor in FULL (F) mode we get new records like you can see in the following picture (Example based on "3FI_GL_0L_TT"):
So, everything is fine.
If we try to use the delta process we do not get new records in update mode "D" although the extraction runs successful everytime without aborting or any error messages. The init of the delta process ("C") is also successful (We get records):
Maybe someone of you have an idea why the delta run ("D") does not deliver any new records although the FULL run ("F") does.
In advance thanks for any help!
fjm
Dear All,
We need to fetch the data from ECC table COSP where Value Type = 11(Statistical Postings) into BW but couldnt find any DS.
We also checked the DSs 0CO_OM_WBS_1 and 0CO_OM_WBS_6 but didnt find the required Value Type.
We have a field as VTSTAT(Statistic ID) in DS 0CO_OM_WBS_1 with values as 0 and 1 against Vtype 10(Actuals) and 20(Plan). But by this way also unable to reconcile data back with COSP table.
Could you please let us know if anyone has come across such requirement?
Thanks,
Nilesh
Hi All,
I have a requirement from the business to enhance the 2LIS_13_VDITM to add the field 'PERIO' of table FPLA.
Is this possible and if it is can anybody explain me how it can be done?
Thanks,
Prateeksha.
Hi All,
we have migrated standard Hierarchies data sources using RSDS (righ click on DS and MIgrate, Using migration project etc). however we are unable to activate the data source after migration.
i have gone thorugh all the forums and we aplied all the notes related to this still we are encoutering same issues.
even
1. Delete data source again replicated in 3.x and them mograted - No luck
2. Deleted existing transfer rules and created new one and migrated - No luck
3. Tried with RSDS_ACTIVATE_ALL program - No luck
tried all the possibilities still no luck..please help.
below are the error messages.
Activation of Objects with Type DataSource
Activation of DataSource 0COORDER_0103_HIER(DEV113), context: MIGRATION_TO_RSDS
Generation of conversion exits and PSA update...
Syntax error in GP_ERR_RSAPTH3, row 30 (-> long text) 1
Error when activating DataSource 0COORDER_0103_HIER DEV113
DataSource 0COORDER_0103_HIER (DEV113) could not be activated
Regards,
Chandrasekhar Reddy.
