Hello All,
I am trying to extract master data in BI system. My system is unicode compatible and the RSCPINST had JA language installed. Still when I am trying to pull Text into BI it shows me as #. Any idea a out the reason ?
↧
Japanese Characters showing as # in BI
↧
RSDMD 194: 0MATERIAL Datarecord is invalid
Hi together,
I tried to load the attributes for 0Material and receive the following error message for all data lines:
Diagnosis
Data record 1 & with the key '000000000000000020 &' is invalid in value
'000000000000000020 &' of the attribute/characteristic 0MATERIAL &.
System Response
The system has recognized that the value mentioned above is invalid, and
has processed this general error message. A subsequent message may give
you more information on the error. This message refers to the same
value, even though it does not state this explicitly.
****
Maybe you have a idea what's wrong?
Thanks!!!
↧
↧
"Message not found (in main memory)" while collecting Bex Web Template
Hi All,
When I am trying to collect a BEx Web Template in Transport Connection, I am getting the below error.
"Message not found (in main memory)"
Anyone has the answer for it?
Thanks very much
↧
Inventory Data source 2LIS_03_BX not avail for installation
Hi,
I want to implement the Inventory flow to the BW system.
I am having the R3 system 4.6C and after installing the MM Data sources following data sources are avail in RSA5 and RSA6.
2LIS_03_BF,2LIS_03_S091,2LIS_03_S194,2LIS_03_S195,2LIS_03_S196,2LIS_03_S197,2LIS_03_S198,2LIS_03_UM.
But i didn't find the 2LIS_03_BX data source after installing the data sources in the MM module in the R3 side.
Please let me know how to get the 2LIS_03_BX datasource in RSA5, is there any SAP note applicable for this issue.
Thanks,
Viswes
↧
Delivery Quantity from 2lis_11_v_scl is wrong for some scheduling lines
I am using 2lis_11_v_scl to extract open orders at a scheduling line level and noticed that some of the Delivery Quantities are wrong, i.e if the ordered quantity is 2000 the delivery quantity is 8000. I see this when I do an init or otherwise, I see the wrong number before it hits BW in ECC' extract checker., is there a known issue with this extractor ? I kept track of a particular scheduling line for he last three days and noticed it's delivery quantity increase, In VA33 i do see a new delivery number and quantity but why is it being assigned to this particular scheduling line ? What could be causing this ?
↧
↧
An internal error occurred during the authorization check.
Dear All,
this week we have encountered "An internal error occurred during the authorization check." when deleting data from PSA & the attached error is displaying when exulting DTP, the same error have been posted in scn.sap.com but it did't mention the exact solution. please help me on this matter.
Regards.
↧
Icons / Symbols within SBIW DataSource tree
Dear all,
I was wondering what the symbols beneath each DataSource mean (see attached Screenshot). Within SAP Documentations I didn't find any information.
Thanks a lot for your help.
Frank
↧
Failure when installing update rules from 2lis_03_bf to 0IC_C03 inventory cube
Dear guys,
I am in BW 7.4 SP6 on HANA. I have no problem when activating business content except for 0IC_C03.
The cube 0IC_C03 is activated sucessfully. But failed to install the update rules between infosource of 2lis_03_bf to 0IC_C03. you know there are many routine for the different stock key figures here. But I could not get the update rules activated.
1)
If I collect the 0IC_C03 and the object before it,
it gives the following error,
Object 0DBGUDUNS (InfoObject,IOBJ) could not be collected for object 0MDME_VENDOR (Communication Structure,ISCS)
Object 0DBCTRYCOD (InfoObject,IOBJ) could not be collected for object 0MDME_VENDOR (Communication Structure,ISCS)
Procedure
If this error occurs while you are installing Business Content, a delivery error may have occurred. Inform SAP. In all other cases, check, for example, that the object has not been deleted by another
it seems its a sap bug,
I check the tables RSDIOBJ , it have the two infoobject in D version only.
When I tried to activate those two infoobject in business content by object type Infoobject, I could not find them by search.
But if I search them by infoarea, I could find them. But when dragging the two objects into right to install, it gives ABAP dump..
access using a 'zero' object reference is not possible..
objects_objref_not_assigned
I suspect that in this version of business content , it have problem on those two infoObjects.
2)
if I only select the update rules,
TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03,
it would give error
Start Routine: Syntax error in routine
If you guys have met such error before, could you please share your experience on how to handle it . Thank you very much.
↧
Error when activating element
Dear Experts,
I have created a query and transported to QAS without any issue.
But when I was going to import same to PRD, error occurs "error when activating element "006EIO7I23Y2G0YYQKJIKEF5R".
Not shown any other details about error.
When I check "RSZCOMPDIR" on Quality system, it shows,
When I check "RSZCOMPDIR" on Production system, it shows,
When I try to import query it shows above error.
Please advice.
Thanks you,
Thilini
↧
↧
Recovering delta for 2LIS_02_SGR
Hi All,
Yesterday we have moved the Enhanced data source change request for 2LIS_02_SGR into production.
Unfortunately we forgot to clean up the delta queue .
Now V3 Job failing continuously .How to correct it?
How go get the missing data present in delta queue before moving the TP.
Please provide any suggestions to fix this issue.Its a production system and need to address issue asap.
Thanks in advance.
Regards,
Venkat.
↧
Decimal data issue with CSV load
Hi Experts
i facing issue when i loading decimal data into CSV file , not getting as expected
example my data in tables
Hours
"8.00 "
"9.75"
But , when i load them same to csv file , only precision value getting load
Hours
"8"
"9.75"
Can anyone please suggest me how to get it load in csv as "8.00"
Thx
Ahalya
↧
Create Delta load in SRM - BW data flow
Hi All,
We have a requirement to develop BI reports based on Shopping Cart (0BBP_TD_SC_1), Shopping Cart Approval (0BBP_TD_SC_APPR_1) and Central Contracts (0BBP_TD_CONTR_2) with some customization of adding new fields in the shopping cart flow.
We have installed the business content data sources and dso's and installed the SAP delivered query's. We have loaded some test data to check the report functionality and everything is fine.
Now , we got the requirement from client the data flow should be based on Delta on a daily basis. Before initializing the delta when we tried to run a full update and the loads are running for long time and finally end with some errors (having data since 2002).
Hence please suggest how to achieve the Delta initialization in SRM - BW and what are the things needs to be considered before doing the delta initialization.
Regards,
Saravanan.M
↧
0FI_AA_12 Extractor Issue
Hi All,
I am facing an issue with the way 0FI_AA_12 (Posted Depreciation Data Source) works.
Issue:
We are using Standard content for Asset Accounting, Now as per my understanding this DS sends planned(which are not yet posted) and posted(deprication run has happened) depreciation data in BW.
For e.g.
If asset is yet to be depreciated with 92.53 value for the year 2015, then at the year start Extractor sends 92.53/12 --> 7.71 value for 12 periods.
So in BW we have
0Asset_Main 0FISCPER 0PST_ODP_PE
A1 001/2015 7.71
A1 002/2015 7.71
A1 003/2015 7.71
A1 004/2015 7.71
A1 005/2015 7.71
A1 006/2015 7.71
A1 007/2015 7.71
A1 008/2015 7.71
A1 009/2015 7.71
A1 010/2015 7.71
A1 011/2015 7.71
A1 012/2015 7.71
Now when the actual depreciation run happens it will post the data in ANLP table for the posted periods.
Say Depreciation run happened for 2 periods 001/2015 as 46.27 and 002/2015 as 46.26.
So in BW we get data as
0Asset_Main 0FISCPER 0PST_ODP_PE
A1 001/2015 46.27
A1 002/2015 46.26
A1 003/2015 7.71
A1 004/2015 7.71
A1 005/2015 7.71
A1 006/2015 7.71
A1 007/2015 7.71
A1 008/2015 7.71
A1 009/2015 7.71
A1 010/2015 7.71
A1 011/2015 7.71
A1 012/2015 7.71
This is where the issue is now after these depreciation runs the asset value becomes 0.
Then in BW if I run the report for fiscal period 004/2015 it shows me Report Output
0ASSET_MAIN 0FISCPER 0PST_ODP_PE
A1 012/2015 107.95
While ECC report shows as:
0ASSET_MAIN 0FISCPER 0PST_ODP_PE
A1 012/2015 92.53
ECC report is showing only 92.53 because after 002/2015 asset value has become 0.
Issue BW extractor should sent the value as 0 for rest of the 10 periods, once the asset has reached it's depreciation value to 0.
I have done lot of analysis and found out how the ECC report and BW reports are working this is the only gap which I found, please let me know if I am wrong in my analysis, I am not able to trace back at the PSA level because PSA is getting deleted.
If anyone has worked on Asset Accouting, then please let me know how it is done in your system
Regards,
Mayank
↧
↧
0FI_AR_4 Enhancement with fields from BSID & BSAD tables
Hi,
My requirement is to Enhance 0FI_AR_4 Data source to include field MWSKZ from BSID & BSAD tables, Based on the SAP Help document 0FI_AR_4 Data source is based on BSID & BSAD tables.
http://help.sap.com/saphelp_nw70/helpdata/en/2f/ea8953d7363d58e10000000a174cb4/frameset.htm
Can you please update steps included to enhance the data source to include field MWSKZ from BSID & BSAD tables….do I need to write any user exit.
Thanks in advance
↧
0FI_AA_12 simulated depreciation
We have a requirement to extract a depreciation forecast/simulation from ECC for IP purposes. Using 0FI_AA_12 as intended to read table ANLP on the ECC side.
We have created a 'Depreciation Planning version D99' and thats what is used in the simulation run job selection below.
When we run a depreciation simulation with this menu path in ECC
Accounting > Fixed Assets > Information System > Reports on Asset Accounting > Depreciation Forecast > Depreciation on Capitalized Assets (Depreciation Simulation)(S_ALR_87012936)
and then take a quick look at a test extraction in rsa6 for 0FI_AA_12 we only see records up to the end of the current fiscal year, even though the report we've run shows us periods out as far as 2011.
We want to be able to extract all periods from the current fiscal year to the ending fiscal period of our simulation run.
My feeling on this is that the report (S_ALR_87012936), is just that, and calculates the results on the fly without posting anything to ANLP. What might be a better step here to really post to ANLP. ?
I've searched this forum and all the others related to BI for items related to this extractor and depreciaton simulation runs in particular. I've even searched other forums (CO etc) in hopes of picking up a clue as to what might be missing. I did locate some relevant OSS notes on the topic but our patch level is high enough that the early notes I did locate (~2005) have all been taken into account.
Points will be awarded.
Thanks
Edited by: Brent Mawhinney on Jul 14, 2008 10:45 AM
↧
BI HR Business Content
Hi,
I am looking for the SAP Delivered Business Content available in BI for HR reporting area.
There are few items which are currently inactive in out BW System, I searched for them in Business Content but I can't find any of them
Please advise how can I install 0FI_IS52 Infoset and all the report available delivered by SAP.
Tahnks
↧
Enhancement of standard datasource in POSDM
Hi guyz,
Any experience with POSDM guyz? I also posted this in BW forum since this is also about extractor in BW..
Thank you.
Loed
↧
↧
SMD Infocubes
Hi Guys,
I am sure many of us would have worked in Solution Manager's Early watch dashboards.
I have few doubts in those EWD matrices...
1) I want to monitor the system health in Solution Manager Infocubes. Can anybody give me the list of Infocubes for checking the system health e.g. CPU Utilization, Back ground/Dialogue processes etc etc
2) Also in SMD Performance I find many performance infocubes. i.e. SMD Performance data - Day 1 ( 0SMD_PED1) and SMD Performance data - Day 2 ( 0SMD_PED2).. I want to know the difference between those infocubes..
3) All those infocubes are real tim einfocubes and how do all this infocubes capture the data ...
please let me know.
Thanks,
T
↧
Adding NAV to existing IOBJ which is used in other cubes ?
Hi,
Currently one IOBJ which has 10 NAV and a compounded IOBJ as well , which is being used in 20 infocube's and MP's. My requirement is to add 5 more IOBJ's to it. Will all the cube's and MP's which are currently using this IOBJ will get inactive ? Please advise alternatives.
Thank You
DR
↧
COPA Delta after datasource enhancement
ECC has added few new value fields in that we need to bring in BW. Since COPA is regenerating data source, I know that we have to delete the existing COPA data source, recreate with the same name and replicate into BW. I am good till this step.
We have over 3 years worth or records. We don't want to do a full re-initialization as it will take lot of time to load millions of records. Requirement is to populate the new fields from last one month.
How do I keep my existing delta and load history for new fields only starting from one month prior. Do I have to do a new info package with different selections and initialization. How does it impact existing delta time stamps.
I tried to search but could not find clear steps. I would really appreciate any help with keeping the delta after enhancement.
Thanks
Raghu
↧