Hi,
We had a 2LIS_* extractor which is enhanced with ZZ fields.
I look for the sode in CMOD which i couldn't able to find any
My assumption is the data source is enhanced using BADI.....As i am not familiar with BADI's how can i create for my data source enhancement code in BADI
Thanks
Dear All,
We have build custom datasource in ecc using function module. we have wbs element field PROID datatype is NUMC and lenght 8 and it's data elemnt is PS_PSP_PNR in the structure.
When we checked the data in RSA3 for this datasource the value's(XXXX.AF14.W.001.041) are populating correctly to this field(WBS ELE). but when we extracted the data into PSA it's showing as '6' and even after activation in DSO.
In BW we have created custom IO as NUMC 8 and output lenght is 24 , conversion routine : ABPSP (same conv. rout. is being used in ecc)..
Kindly provide your valuable inputs . thanks in advance.
Thank you!
Hi All,
We are extracting GL data using 0FI_GL_4 and noticed that some documents are not able to transfer to BW because archived in sap source system.
Can anybody advice how can I retrieve archived data from SAP to BW.
Noticed that in FBL3N can display those archived documents.
Regards
Naani.
Hi,
I have added 2 zzfields to the extract structure ? its working perfect ? Data showing it ECC and BW. Now I know how to do a repair full load to bring the historical data for these 2 fields to the DSO. But my question is, We have the historical data of 5 years in the infocube and how do we get the historical data for these 2 fields in the infocube ? I mean as the DSO has the overwrite feature, it will pull all the historical data with the repair full request from ECC, correct ? But how do we load this to the infocube. We do not want to delete the existing data in the infocube, is it possible without deleting the existing data ? Please help.
Thanks
DR
May I know the aggregate table name for an infocube ? I want to see the loaded aggregate for an infocube, is there a physical table name created when we have aggregate for an infocube ? or the aggregates are created from the existing fact table of the ic ? Please reply.
thanks
DR
Hello BW Experts,
We are using 0CRM_OPPT_H Datasource in our CRM extracts. We are facing an issue with 0CRM_OPPT_H datasource in CRM Quality.
We are able to extract data into BW Quality system for this datasource without any issue. Both FULL and Initialization loads are successful to BWQuality. But when we check extractor checker (/nrsa3) for this datasource in CRM Quality, we are getting 0 records. The extract checker in CRM Development for this datasource is returning us some records.
I am sure that we don't need to run any Setup tables for this datasource. We have this datasource as active in BWA5 tcode in CRM Quality. Can someone please let us know how to fix this issue?
Thanks,
Naveen.
Hi All,
I have checked all forums since one hour but unable to identify the similar issue.
I have identified one but that thread no solution was mentioned.
Please note I have got one datasource ' 0SRM_TD_PO in SRM system.
The datasource is active version and I have mapped with all the other transformations etc to the standard DSO - 0SRPO_D1
This DSO contains mappings with these below trasnforamtoins
TRCS 2LIS_02_HDR -> ODSO 0SRPO_D1
TRCS 2LIS_02_ITM -> ODSO 0SRPO_D1
TRCS 2LIS_02_SCL -> ODSO 0SRPO_D1
TRCS 0SRM_TD_PO -> ODSO 0SRPO_D1
For all the above transformations data is populating fine but there was an issue while extracting the data.from 0SRM_TD_PO -> ODSO 0SRPO_D1.
Datasource is active version and no such normal common issues like inactive or replication etc.
My opinion here was do we need to make any settings in SRM system to fetch the data for this datasource?
Because for some datasources there are some prerequisites will be there(for example if you want to load the data to 0FI_AA_11 you need initiate some other datasources then only this will have the information).
So is there any such settings needs to be done to get the data for 0SRM_TD_PO?
Kindly advise.
Thanks
Sri
Hi All,
To get Absence/Attendance type I am using 0HR_PT_2 Data source & Reporting Type 00000001 .To get Particular Reporting time type wise Absent days I am using T557G Table .
In 0HR_PT_2 Data source I have PERNR(Personnel Number) , KMONTH(Calendar year / month) , KDAY(Calendar day) & REPTT(Reporting Time Type) are coming . So I need Absence/Attendance type and Ps Grouping against this values in a record.
T557G Entrys are :
Reporting Time Type PSG A/ATYPE UNIT
00000001 1 0100 15
00000001 1 0110 15
00000001 1 0140 15
Can any one please help on this issue.
Regards,
Samar
Hi Gurus!!!
I am facing a special and urgent situation with the extractor 2LIS_03_BF. The problem is that I is not extracting all the records that need to extract to BW.
According to this document (http://scn.sap.com/docs/DOC-31044) I have done step by step all directions according to reinit this extractor. The difference according to the needs of the model have OLI1BW transaction in which the posting date range is 01/10/2013 - 31/12/2099, but the BW extractor is carried forward from 17/01/2014. I should note that the model which feeds on this exhaust is not a standard model.
I will be missing some configuration in ECC for the data capture extractor from the date which I am pointing at OLI1BW transaction?
Thanks in advance.
Ignacio
I can see flat file all records 140 in above screen but i could not see data in PSA . when i am trying to see the PSA it show not data .
I have tries to make status to green but still request not process to Data target .
Is there anyway to delete only certain records from LBWQ without having to delete all records? We have 1 bad record that needs to be deleted.
Hello,
I try to load stock data with 2LIS_03_UM.
When I extract data using setup table and full load I don't get the same records as I get with delta load. Although the key figures values are the same, the documents numbers are different. Most documents from delta load are ML (material ledger) documents while documents from full load (via setup table) are mainly FI documents.
What can be the reason? How can I fix it?
Thank you,
Hadar
Dear Experts
I had enhanced the extractor for 2LIS_03_BF with appended structure fields.
Before transport, there was no delta queue was not initialised. Probably, it was deleted from BI scheduler.
In R/3 , LBWE was active for the unserialised V3 update.
Before transporting into this system, I deleted the delta queue in RSA7 and set lbwe Update to 'inactive'.
I cleared LBWG and checked RSA7 and LBWQ.
I initialised Delta in BI without data transfer.
After the transport, I checked the datasources and RSA3 working fine for full load.
I loaded some data from setup table into BI. The BI system automatically replicated the datasource. Data was loaded.
But the new fields are not enabled in BI yet.
At RSA3 level, the full load is correct.
So, I could still not see the new fields in BI. I believe just updating the communication structure in BI will resolve the issue.
So, I wanted to test the Delta to see if the new fields when changed will generate delta in R/3.
So, i edited a material doc in R/3 to change a text field which is one of the new append structure fields.
I saved and load delta in BI. I ran the RMBWV303 jobs to pull the delta records . Then I load Delta in BI. Records were loaded but not the one I changed.
I ran RSA7 . Can see the datasource and record number still there. I drilled in and cannot find the material doc number I changed. So, the delta not generated.
I ran LBWQ and cannot find MCEX03 after i deleted it initially.
How can I add this queue back?
I have initialised delta load without transfer earlier and LBWE update was 'active'.
Does this mean the text field in the material document does not trigger delta?
The field is BKTXT of MKPF.
By full load, RSA3 can see the appended new fields being populated.
Please could you advise what could be the problem? Is it got to do with the missing MCEX03?
Thanks.
Pascal
Hi all,
The SAP Standard extractor 0FI_GL_4 seems to include all Account Assignment types (Cost Centre, WBS, Order etc) other than Network (NPLNR)......would anyone know why Network isn't included as standard?
Im considering appending it to the extract structure what are your views on this?...or alternatives?
Thanks
Lee
Hi,
I am using the extractor 0CO_OM_OPA_1 to extract plan, actual costs and quantities that were posted on the internal order.
But I need extract the Estimates costs from IW33 t-code and this extractor dont have this information.
Somebody know where i can extract this information?
Thanks a lot
Hi experts,
we use the SAP BI Standard InfoCube 0PP_C03 "Plan/Actual Comparison Operation/Work Center View" with the DataSource 2LIS_04_P_ARBPL "Work Center View from PP/PP-PI".
We want to report the plan and actual values each operation. The relevant actual values are available and extracted in the DataSource:
| ISM01 | QUAN 15 3 Conf. activty 1 |
| ISM02 | QUAN 15 3 Conf. activty 2 |
| ISM03 | QUAN 15 3 Conf. activty 3 |
| ISM04 | QUAN 15 3 Conf. activty 4 |
The plan values that we need are the same values as in t/code CO03 >>> tab Standard vals
Necessary plan values:
VGW01 1 Types VGWRT QUAN 9 3 Standard Value
VGW02 1 Types VGWRT QUAN 9 3 Standard Value
VGW03 1 Types VGWRT QUAN 9 3 Standard Value
VGW04 1 Types VGWRT QUAN 9 3 Standard Value
In the LO Cockpit (LBWE) for DataSource 2LIS_04_P_ARBPL are only the Unit-Values (VGE01, VGE02, etc.) available
Here (on the right (MCAFVG) or left side of LBWE) we miss the relevant plan values (VGW01, VGW02, etc.) 
, to enhance the DataSource 2LIS_04_P_ARBPL on a easy way.
Any experiences with the enhancement of the plan fields VGW01, VGW02, etc. or any ideas why this specific fields are not available to enhance in the LBWE? It´s curious, because the Unit-Values VGE01, VGE02, etc. are available.
Many thanks in advance!
Best regards,
Michael
i need to extract the Activity , The import code ( HS code), and the EBan (bar code ) for a reference .
what are the transactions to use
HELLO
I have bi content,but i think it's not compelete, for example roles aren't complete,
I think ,i must install BI_cont_73 or KIBIIIH.CAR.
plz help me
Hi guys
The 0PSORT info objects comes from BI Content with text
Does anyone know from which datasource should the text be loaded???
Regards
Shlomi
Hi,
I have added 2 zzfields to the extract structure ? its working perfect ? Data showing it ECC and BW. Now I know how to do a repair full load to bring the historical data for these 2 fields to the DSO. But my question is, We have the historical data of 5 years in the infocube and how do we get the historical data for these 2 fields in the infocube ? I mean as the DSO has the overwrite feature, it will pull all the historical data with the repair full request from ECC, correct ? But how do we load this to the infocube. We do not want to delete the existing data in the infocube, is it possible without deleting the existing data ? Please help.
Thanks
DR