Hi guys,
Just wondering any of you tried the option of using BEx query as source for OpenHub? Can you please share?
I created an openhub destination with few info objects (one char/one time char/one key figure/one unit of measure for test) and created a query with same objects. But when I try to create the transformation, I am getting the below message, when I am trying to create a new transformation.
Please advise.
Thank you,
Ramana
Hi experts,
we have activated the SAP BI Standard InfoCube 0SD_C14 "Backorders".
With the help of this Cube we want to report the Backorders week by week (History Data).
Example:
Sales Doc. schedule line date = 01.11.2013, 5 pieces -> actual date of delivery = 23.02.2014, 5 pieces
Data load into Cube 0SD_C14 on 22.02.2014 -> 113 days backlog
Data load into Cube 0SD_C14 on 23.02.2014 -> 0 days backlog
The 0CALDAY, 0CALMONTH and 0CALWEEK is derived on the systemdate.
For my example test order ...256 the Backlog history works fine (22.02.2014 = 113 days, 23.02.2014 = 0 days). 5 pieces delivered on 23.02.2014
For the other sales documents I need also the Backlog history, After the data load I expect 153 days (...255), 287 days (...257), 151 (...259) on 23.02.2014.
Any ideas or experiences with the history data in 0SD_C14?
Many thanks in advance!
Best regards,
Michael
Dear All,
We have build custom datasource in ecc using function module. we have wbs element field PROID datatype is NUMC and lenght 8 and it's data elemnt is PS_PSP_PNR in the structure.
When we checked the data in RSA3 for this datasource the value's(XXXX.AF14.W.001.041) are populating correctly to this field(WBS ELE). but when we extracted the data into PSA it's showing as '6' and even after activation in DSO.
In BW we have created custom IO as NUMC 8 and output lenght is 24 , conversion routine : ABPSP (same conv. rout. is being used in ecc)..
Kindly provide your valuable inputs . thanks in advance.
Thank you!
Hi all,
Does any one knows how can I get the correspondent R/3 tables for the following Treasury Datasources:
0CFM_INIT_POSITIONS
0CFM_DELTA_POSITIONS
0CFM_MARKET_VALUES
0CML_CASHFLOW
0CML_DELTA
0CML_DELTA_CAP
0CML_INIT_BUDAT
0CML_INIT_DDISPO
0CML_INIT_DFAELL
0TR_LP_1
0TR_CM_1
Thanks in Advance,
ET
Hi,
We have an issue related to delta records. The extractor 0CFM_DELTA_POSITIONS is not picking the delta records.
The user has changed the interest percentage (Product type = 51A(Fixed term deposit) & Transaction type = 100 (investment)) for a transaction using FTR_EDIT.
When we check it in ECC side(FTR_EDIT), the updated cashflow is shown but when we check for delta records in RSA3, it is not picking the delta records.But when we create a new transaction, it is fetching those records.
Your inputs are highly appreciated.
Regards
Seshu
Hi,
I want to know in which way do 2LIS_02_ITM and 2LIS_02_SCL extractors work because facing to situations with them:
Situation1
I realized that not all Purchasing Orders are being transferred when executing them. I mean, when I run these extractors filtering by a specific Purchase Order Number in EBELN selection field no record is returned. However, this Purchase Order has a record in EKKO table and many records in EKPO (its items).
Situation 2
By other side, I also run a simulation of a full extraction in RSA3 without any filter and both datasources extracted 800,000 records approximately. But, in EKPO table there are 150,000 records aprox. I would expect these extractors to transfer just one record for each Purchase Order Item but they transfer much more records for each PO.
I have been reading help.sap documents about both data sources but they don't specify any filter made on Purchasing information (situation 1) or the cause of duplicating/triplicating items (situation 2) .
Could you please explain the way these two extractors work, please?
Thanks in advance.
Best regards,
Ana
Hi,
We r trying to extract the sap data using DART. Extraction files will be stored in a tape via commonstore. How can I retrieve the data from the tape into SAP using DART.
If anyone has used DART or know a contact who used DART please post it.
Thanks
Kiran
Hi,
I found out that in some cases the stock inizialization datasource 2LIS_03_BX (Tcode MCNB) extracts
incorrect data.
I compared data result between Tcode MCNB and stock tables (MBEW, MARD) and got different values.
Does anyone encounter this issue?
Thanks,
Mohamad.
Dear All,
In our project we are using shipment item level standard data source 2LIS_08TRTLP to pull the shipment item data from ECC to BI.We are facing an issue with this data source, Inbound shipmemnts are not coming into BI through this data source.No code was wriiten at CMOD to drop shipments.
We are using Delta process as ABR and delta option as numeric pointer.
Did anybody faced the same situation please share your thoughts on this issue.
Thanks for your help.
Regards,
Nagarjuna
Hi,
I want to delete duplicates using APD but when I have written the ABAP code it is not working.
Below is my abap screenshot. Please le me know how to delete adjacent duplicates. I went through several post in SCN but it is not helping.
Thanks & Regards,
Kumkum Basu
Hi Gurus.
We have activated the standard content for GL accounting and use the multi provider 0FIGL_M30 which consist of the standard cube 0FIGL_C30 and virtual cubes 0FIGL_V30 and 0FIGL_V31. The problem is that when I restrict my balance sheet query to the virtual provider 0FIGL_V30 my Profit and Loss are calculated correctly. BUT if I use the replicated Cube 0FIGL_C30 which is loaded from 0FIGL_V30 I do not get any data in the calculated Profit and Loss nodes of the hierarchy.
Any help would be appreciated.
Regards.
Koos.
Hi
I am trying to install the objects for the infocubes and I am getting the warning message I have attached. I am not sure if I should progress or not?
Please assist me
Hi Folks,
I have been loading data from2LIS_02_ITMextractor to a Write Optimized DSO.
After the load, I found that the record count is showing a huge difference. 65 Million records in PSA and 33 Million records in WDSO.
DSO was empty and we have loaded all requests as " Request by Request ".
I compared the number of requests between PSA and DSO. All the requests from PSA were loaded except the requests in PSA which says
" NO data Exist in PSA".
1) There is no Filter in DTP
2) No Routine
3) Allow Duplicate Records is Checked
4) Checked with record count based on Document Date. There were some records missing.However Im wondering I see all the request being loaded to DSO.
5) Transferred and Added records shows same on all the requests in DSO.
Please assist with this issue.
I have a question regarding how the deltas work for the datasource 0CO_OM_OPA_6. We are loading directly to the 0opa_c11 cube. It seems that we are missing some delta records but not all of them for a particular day. I looked at the function module and it has a delta mode and a full mode. It looks like it reads this table, BWOM2_TIMEST, to get the time stamps. How can we lose some records?
Error: Source system already exists. Message no. RSAR201
We have installed a BI 7.0 system recently and I am setting up the server to connect to SAP ERP.
In TA SM59 a connection to the SAP ERP has been established. The Remote Logon is OK, (meaning clicking it nothing happens). The Connection Test is OK.
According to the Best Practices paper: B84: BI Connectivity (B84)
http://help.sap.com/bp_biv170/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
I have done the following:
In TA RSA1
1. Choose Modeling.
2. Choose Source Systems.
3. Select SAP in the window on the right.
4. Choose the Context menu (right mouse click).
5. Choose Create.
6. Make the following entries:
Available destination: (The above tested connection)
Background user in source system: RFCUSER (I created the user in ERP according to step 1.4 in B84)
Password for source system: *****
Background user in BI: RFCUSER (I created the user in BI according to step 1.4 in B84)
Password for BI user: *****
8. In the dialog box Please log on as an administrator in the following screen choose Continue.
9. Log on to the Source System with your administrator user. Choose the correct client.
10. On the dialog box New Source System Connection choose Continue.
THEN I GET THE ERROR:
Source system already exists.
Message no. RSAR201
What is wrong? I cannot locate any SAP notes to help on this problem.
Best regards,
Carsten Pold
Hi All,
I have developed data flow with 0FI_GL_4 ->DSO->CUBE to read data from FBL3N (GL line items) but I have problem with reconciliation.
My comparison as follows.
Step-1: In FBL3N, GL account, comp.code, period and checked normal items under type values are equal to BW DSO values but when I check Normal items, Noted Items & Parked items under Type then the values are not able to match with BW DSO.
Any specific reason why I could not get noted & parked items?
naani.
Hi,
I have installed total 0ic_c03 cube and successful.
Data is populating correct. When ever Releasing the Request error getting which Local objects not captured in request which are there in 2lis_03_bf info source, For this Error I have deleted the objects from info source and activated and activated transformation. But those object are there in the ROUTINES and disturbed. KEYFIGURES Routine are disappeared.
Again when have installing the BF infosource and transformations from Business content is getting below error. for Ref below screen shot.
Please advise me : urgent
Thanks & Regards,
Srinu.Rapolu
Hi,
What is the significance of COBL_NR from RBCO (table) in the extractor.
How the data processed in RBCO- COBL_NR .
As i have issue with RBCO- COBL_NR field in 2LIS_06_INV extractor.
Invoice Verification - SAP Documentation
Thanks in advance
Hi
Please can someone assist,
When using the extractor, I get the correct data but it brings through only the latest salary group. For example my data is:
01012012 Band7
01012013 band 8
01012104 band 9
The extractor only extracts the 01012104 band 9 record.
This is what is pulled into the PSA.
Is there somewhere I can change this, or how would I do this.
I need to extract all three records which currently reside in table PA00008.
Thank you
Hi,
I have to reload data in 0fi_gl_14 0figl_o14 and zfigl_c14(approx 20 mln records).
Is it good to use Init with data transfer or full & init without data transfer form of transfer while loading to psa,dso and datacube.
What amount of data is large enough for using full method of transfer.
Best regards,
Leszek